This is a 10K Ohm (10 kΩ) single-turn carbon film potentiometer for panel mounting, with a linear taper and a 2 W rating. A 10K Ohm value is commonly used for voltage dividers feeding microcontroller analog inputs, LCD contrast, setpoints and general-purpose adjustment. The round slotted shaft takes a knob or a screwdriver, and connections are made to solder terminals.
Key Features
- 10K Ohm (10 kΩ) resistance, ±10% tolerance
- 2 W power rating and 500 V voltage rating
- Linear taper, single turn, carbon element
- Round slotted shaft for knob or screwdriver adjustment
- Panel mount with solder terminals
Specifications
| Resistance | 10KΩ (10,000 Ohms) |
|---|---|
| Tolerance | ±10% |
| Power | 2 W |
| Voltage rating | 500 V |
| Turns | Single turn |
| Taper | Linear |
| Resistive element | Carbon |
| Type | Rotary, metal |
| Shaft | Round, slotted |
| Mounting | Panel mount |
| Termination | Solder |
| SKU | 18PMW10K |
What's Included
- 10K Ohm 2W panel-mount potentiometer
Ideal For
Panel controls that need more power handling than a standard 1/2W pot, at 10K Ohm.
Frequently Asked Questions
How much power can it handle?
It's rated 2 W, four times a typical 1/2 W panel pot, with a 500 V voltage rating. As with any pot, keep current through the wiper modest, since only part of the element carries it at low settings.
Linear or audio taper?
Linear: resistance changes evenly with rotation. That suits setpoints, dividers and control inputs. For audio volume an audio (log) taper usually feels more natural; a linear pot will work but most of the volume change happens early in the turn.
What is the resistance code for 10K Ohm?
In the three-digit code used on many potentiometers and trimmers, 10K Ohm is written 103: the first two digits (10) followed by 3 zeros. Markings vary by maker, so go by the listed value.