10 Pack 10K Ohm (10 kΩ) Multi-Turn Cermet Potentiometers with Knob – 15 Turns, Linear, 0.75W, 3/4" Rectangular, Side Adjust, Through Hole

10 Pack 10K Ohm (10 kΩ) Multi-Turn Cermet Potentiometers with Knob – 15 Turns, Linear, 0.75W, 3/4" Rectangular, Side Adjust, Through Hole

18MTK20KPK10
Regular price
$19.99
Sale price
$19.99
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

This pack contains 10 × 10K Ohm (10 kΩ) multi-turn cermet potentiometers with a linear taper, rated 0.75 W, each with an adjuster knob. They take 15 turns end to end, so you can set a value much more finely than with a single-turn pot. A 10K Ohm value is commonly used for voltage dividers feeding microcontroller analog inputs, LCD contrast, setpoints and general-purpose adjustment.

Key Features

  • 10K Ohm (10 kΩ) resistance, ±10% tolerance
  • 15-turn adjustment for fine, precise settings
  • Knob for side adjustment by hand
  • Linear taper; cermet element rated 0.75 W
  • 3/4" rectangular body with through-hole pins
  • 10 pieces per pack

Specifications

Resistance 10KΩ (10,000 Ohms)
Tolerance ±10%
Power rating 0.75 W
Number of turns 15
Taper Linear
Resistive material Cermet
Type 3/4" rectangular, with knob
Actuator orientation Side
Mounting Through hole
Termination Pins
Pack quantity 10
SKU 18MTK20KPK10

What's Included

  • 10 × 10K Ohm multi-turn potentiometers with knob

Ideal For

Precise 10K Ohm calibration of sensors, references and gain stages on prototypes and test fixtures.

Frequently Asked Questions

Why choose a multi-turn pot?
Spreading the full resistance range over 15 turns makes each turn change the value only slightly, so it's much easier to hit an exact setting and it is less likely to drift if bumped.

Linear or audio taper?
Linear. The 10K Ohm resistance changes evenly as you turn it, which is what you want for calibration, dividers and setpoints.

What is the resistance code for 10K Ohm?
In the three-digit code used on many potentiometers and trimmers, 10K Ohm is written 103: the first two digits (10) followed by 3 zeros. Markings vary by maker, so go by the listed value.