This pack contains 10 × 50K Ohm (50 kΩ) multi-turn cermet potentiometers with a linear taper, rated 0.75 W, each with an adjuster knob. They take 15 turns end to end, so you can set a value much more finely than with a single-turn pot. A 50K Ohm value is commonly used for higher-impedance voltage dividers, RC timing (for example 555 timer circuits) and gain adjustment.
Key Features
- 50K Ohm (50 kΩ) resistance, ±10% tolerance
- 15-turn adjustment for fine, precise settings
- Knob for side adjustment by hand
- Linear taper; cermet element rated 0.75 W
- 3/4" rectangular body with through-hole pins
- 10 pieces per pack
Specifications
| Resistance | 50KΩ (50,000 Ohms) |
|---|---|
| Tolerance | ±10% |
| Power rating | 0.75 W |
| Number of turns | 15 |
| Taper | Linear |
| Resistive material | Cermet |
| Type | 3/4" rectangular, with knob |
| Actuator orientation | Side |
| Mounting | Through hole |
| Termination | Pins |
| Pack quantity | 10 |
| SKU | 18MTK50KPK10 |
What's Included
- 10 × 50K Ohm multi-turn potentiometers with knob
Ideal For
Precise 50K Ohm calibration of sensors, references and gain stages on prototypes and test fixtures.
Frequently Asked Questions
Why choose a multi-turn pot?
Spreading the full resistance range over 15 turns makes each turn change the value only slightly, so it's much easier to hit an exact setting and it is less likely to drift if bumped.
Linear or audio taper?
Linear. The 50K Ohm resistance changes evenly as you turn it, which is what you want for calibration, dividers and setpoints.
What is the resistance code for 50K Ohm?
In the three-digit code used on many potentiometers and trimmers, 50K Ohm is written 503: the first two digits (50) followed by 3 zeros. Markings vary by maker, so go by the listed value.